ETELEC MPGEL 1LITRE TWO COMPONENT SILICONE INSULATING GEL, FILLING SEALING BOXES

Description

PRODUCT BENEFITS:

• Simple – The two components are supplied in separate containers, thus ensuring the correct 1:1 mixing ratio. MPgel plus may be partially used as needed, and reused even after the pack has been opened, providing maximum yield.
• Rapid cross-linking – MPgel plus has an extremely short cross-linking time, allowing rapid installation and reducing delays before activation.
• Non-toxic
• Re-enterable
• Eco-friendly
• Easy pouring
• Very fast cross-linking
• Excellent electrical insulation
• Good mechanical resistance
• UV resistant
• Protection from elements (rain, moisture), dust, animals, insects, leaves
• No expiration date
• Reusable after opening

TYPICAL APPLICATIONS INCLUDE:

• Filling junction boxes Insulation of 0.6/1 kV electrical connections
• Insulation of electronic boards and components
• FILL, ENCAPSULATION, POTTING: Filling junction boxes. Encapsulating or potting electrical components or enclosures. Encapsulating electronic boards and components
• INSULATION: Insulation of 0.6/1 kV electrical connections
• BURIED & SUBMERGED: Buried, submerged, or exposed electronics.
• INDUSTRIES: Electrical contracting Telecommunications Manufacturing Robotics Marine and Aquatics DIY Electronics
• PROTECTION: Water protection, dust protection, electrical / thermal insulation, flame resistance, critter proofing.

---

Product Description

Advantages:

Non-hazardous product, complies with European regulation (CLP), reusable and removable. Low viscosity. High dielectric strength. High moisture protection. Solvent free. Non-irritating. Without deadline.

Reaccessible two-component silicone gel with fast cross-linking for electrical insulation up to 1 kV.

Application:

Filling junction boxes Insulation of electrical connections from 0.6 to 1 kVisolation of boards and electronic components Protection of connections against amospheric agents (rain, humidity) from dust and intrusion of animals, insects, leaves

Fast cross-linking

12 minutes at 23ºC

Reduced wait time for connection power on.

Colour:	Light Blue
Mixing Ratio:	1: 1.
Dielectric strength	25.5 kV mm.

Use time:	5 minutes (at 23°C)
Polymerization time.	12 minutes (at 23°C)
Operating temperature:	-60°C to +200°C.

How to use: MPGel.

Pour component A and component B in a 1:1 mixing ratio into the supplied graduated jug.

Example: 100 ml A and 100 ml B

Mix the gel for at least 1 minute until the color of the mixture is evenly blue.

Cut the gel into the container to be insulated.

Attention: The gel begins to solidify 5-6 minutes after mixing.

Wait about 12 minutes for complete solidification of the gel. It is possible to close the container already at this stage. The 12 minutes after casting, sealing and insulation were completed.

You can electrify the system.