WÜRTH Moisture-free Electrical Contact Cleaner Spray

Description

Key Features

• Moisture-free formula for safe use on powered-down electrical systems

• Fast evaporation to ensure contacts are dry shortly after application

• Removes oxidation, oils, grease, and sulfur deposits from contact surfaces

• Improves electrical conductivity and reduces resistance

• Safe for most plastics and electronic components when used as directed

• Leaves minimal to no residue after drying

• Convenient 500 ml aerosol can for workshop or field service use

Applications

• Electrical connectors, plug terminals, relay contacts

• Printed circuit boards (maintenance and repair)

• Automotive sensor plugs, ignition connectors, battery terminals

• Industrial switchgear, control panels, terminal blocks

• Audio/visual equipment, low-voltage and signal circuits

• Preventive maintenance to restore clean electrical contact surfaces

Usage Instructions

1. Disconnect power before applying.

2. Spray directly onto the contact or connector to flush away contamination.

3. Allow the solvent to evaporate completely.

4. Reconnect power once the component is fully dry.

5. Test on sensitive plastics if uncertain about compatibility.

Safety Notes

• Extremely flammable aerosol — keep away from heat, sparks, and open flames.

• Pressurised container — do not expose to temperatures above 50 °C.

• Use in a well-ventilated area.

• Avoid prolonged skin contact or inhalation of vapours.

• Store upright and protect from direct sunlight.